Fire Watch
Fire Watch Services in San Jose, CA
In San Jose, fire watch is arranged when a fire protection or life safety system is out of service, or during welding and cutting, at properties including Downtown hotels and theaters, the shops and hotel at Santana Row, and technology offices in North San Jose. McCray provides fire watch officers who patrol affected areas, keep a written log and know how to report an emergency to the fire department.
See the San Jose page for every security service in San Jose, or the Fire Watch Security overview for how this service works.
Where Fire Watch Is Used in San Jose
Fire watch follows building systems more than neighborhoods, but in San Jose a few property types stand out. Downtown has hotels, museums, the San Jose McEnery Convention Center and theaters such as the California Theatre and the Montgomery Theater, all buildings where people gather. Santana Row combines shops, restaurants and a hotel. North San Jose has hotels, technology offices and two casinos. Japantown, with its boutiques and traditional shops, and Willow Glen, with its boutique shops, are areas where tenant renovation work can take a system offline.
- Downtown San Jose
- SoFA District
- Santana Row
- North San Jose
- Japantown
- Willow Glen
Fire Watch Considerations in San Jose
The San Jose Fire Department’s Fire Watch policy applies when fire protection equipment or a life safety system is inoperable, defective or taken out of service. The building owner or manager assigns the watch personnel, who are subject to the Fire Marshal’s orders, and the watch may not be stopped until the department authorizes it. Post Orders for these posts set out the patrol route, the procedure for reporting emergencies to the department and, where a sprinkler system is shut down, the procedure for reactivating valves in the event of a fire.
Construction and alteration projects carry their own requirement. The department’s procedures for fire safety during construction call for qualified personnel to serve as an on-site fire watch during construction that is hazardous in nature, citing California Fire Code Section 3305.5, and the sole duty of that person is to watch for fire. For welding and cutting, California Title 8, Section 4848 requires the employer to establish a fire prevention and suppression procedure. Post Orders for hot work watches identify the work area, extinguisher locations and the alarm procedure.
Occupancy affects how a watch is staffed. The convention center hosts events throughout the year, Downtown theaters fill on performance nights, hotels are occupied overnight, and the casinos of North San Jose offer gaming around the clock, so a watch in these settings may have to run through nights and weekends until the department authorizes it to end. The department’s policy requires watch personnel to patrol the entire building, including offices, basements and penthouses, and to wear visible identification such as an armband or nametag.
Fire Watch Requirements in San Jose
The San Jose Fire Department’s Fire Watch policy, citing California Fire Code sections including 901.7, sets the conditions for a fire watch when a fire protection or life safety system is inoperable. Watch personnel must be approved by the Fire Marshal, patrol their designated area at least once each half hour, record rounds in a logbook kept on the premises for department inspection, and perform no other duties while on watch. For welding and cutting, California Code of Regulations, Title 8, Section 4848 requires an employer procedure based on ANSI Z49.1 and NFPA 51B. Post Orders for fire watch posts are written to reflect the applicable requirements.
Screening, Training and Supervision
Officers complete a five-stage screening process and tier-based training before assignment, including de-escalation and incident documentation. Supervisors make unannounced site visits, and the McCray Operations Desk answers 24/7/365. Incidents are documented on scene, and clients receive reports in the same format at every location.
Related Services in San Jose
Common Questions
When Does the San Jose Fire Department Require a Fire Watch?
The department’s Fire Watch policy applies when fire protection equipment or a life safety system is inoperable, defective, inadequate or out of service, and in other situations the Fire Marshal considers necessary. Its construction procedures also call for an on-site fire watch during construction that is hazardous in nature. The watch continues until the department authorizes it to stop.
What Records Does a Fire Watch Keep in San Jose?
Watch personnel record each patrol round and any significant information in a logbook provided by building management. The logbook stays on the premises, is available for inspection by the department, and includes names and telephone numbers for emergency calls and calls to key management personnel.
How Is Coverage Priced?
Rates depend on the officer classification, hours, schedule and site requirements. McCray provides a written rate schedule after reviewing the needs of each site. Holiday, overnight and short-notice coverage is billed at a premium rate.
Request a Security Assessment in San Jose
Call (833) 832-6647 or request an assessment online. See the San Jose page or view all service areas.