Insights
Security Post Orders: What a Complete Set Contains and How to Keep It Current
What security post orders are, what a complete set contains, and how site teams write, approve, update and use them on every shift at a property.

Security post orders are the written instructions that tell an officer what a specific post requires: where to stand or patrol, what to check, who to call and what to record. They turn a contract and a building’s policies into duties that any officer, including one covering the post for the first time, can carry out the same way. When they are thin, out of date or missing from the post, coverage depends on memory and word of mouth.
What Security Post Orders Are
The sample post orders published by the District of Columbia Department of General Services state that “A security post is an area of responsibility,” and that a post “can either be ‘Fixed’ or ‘Roving’.” Post orders are the instructions attached to that area.
A U.S. Department of Energy performance work statement for the National Energy Technology Laboratory describes post orders as the “policies and procedures developed by the contractor for implementing the requirements” of the contract, and requires the contractor to “implement and maintain post orders for each post or function staffed by security personnel.”
Post orders therefore implement the contract and site security plan rather than replace them, and they are post specific. A lobby desk, a loading dock and an overnight patrol route each need their own instructions, even inside one building.
How Post Orders Fit With Other Site Documents
Post orders sit within a set of related documents:
- The security contract or scope of work sets what the client is buying: posts, hours and duties.
- The site security plan sets the overall approach to protecting the property.
- General orders cover rules that apply to every post, such as uniform, conduct and reporting standards.
- Specific post orders cover the duties of one post.
- The building’s emergency action plan sets evacuation and emergency reporting procedures that officers must follow and often help carry out.
The Department of Energy statement calls for post orders that “contain security functions that apply to all sites and all posts” alongside post orders “specific to the work requirements of the post or function at the individual site.” Many organizations call the first group general orders and the second group specific orders. Related terms are covered in the security glossary.
What a Complete Set of Security Post Orders Contains
There is no single national format for private sector post orders, and client, agency and state requirements differ. Published government examples point to a common set of contents.
Document control. Title, post name, site, effective date, version number, document owner and approval signature. The Fermi National Accelerator Laboratory’s general post order lists an owner, an effective date and a review cycle as standard sections.
Purpose, scope and authority. What the orders cover and which contract, plan or policy they implement. The District of Columbia sample opens with subject and purpose sections and also includes an authority section.
Post description. Location, whether the post is fixed or roving, hours of coverage, staffing and relief arrangements, and any equipment assigned to the post.
Duties in order. What the officer does at the start of the shift, during it and at handover. Duties should be written as actions: “Check that the loading dock door is closed and locked” rather than “Maintain dock security.”
Access control. Who may enter, through which doors, at what times, and how visitors, contractors and deliveries are verified and logged.
Patrol requirements. Routes, checkpoints and what to look for at each one, such as propped doors, water leaks, lighting failures and blocked exits. The District of Columbia sample tells its roving post to “periodically check the doors and ensure they remain secured throughout the shift.”
Keys and access credentials. How keys and cards are issued, signed out, returned and accounted for. The Alabama State Military Department’s security guard performance work statement lists receiving, securing, issuing and accounting for keys as a required part of its site procedures.
Reporting and records. Which logs are kept, the format of incident reports, and when a report is required. The Department of Energy statement says the incident report format “will be contained within the post orders,” and the same for loss and theft reports.
Emergency procedures. Fire alarms, medical calls, utility failures, severe weather and evacuations, tied to the building’s own emergency action plan.
Contacts and escalation. Names or titles and numbers for the site supervisor, property management, engineering, the client contact and the security operations desk, with clear rules on who to call first.
Conduct and customer service standards. What officers are expected and not permitted to do while on post. A Government Accountability Office report on federal contract guards noted that post orders “describe a number of things that guards are prohibited from doing while on post.”
Attachments. Floor plans, patrol maps, sample log pages and contact sheets.
Linking Post Orders to the Emergency Action Plan
Emergency duties in post orders should match the building’s emergency action plan, not run in parallel to it. Under the Occupational Safety and Health Administration standard at 29 CFR 1910.38, an emergency action plan must include, at a minimum, procedures for reporting a fire or other emergency, procedures for evacuation including exit route assignments, procedures for employees who remain to operate critical operations before they evacuate, procedures to account for employees after evacuation, procedures for employees performing rescue or medical duties, and the name or job title of people who can be contacted for more information.
The same standard requires the plan to be in writing, kept in the workplace and available for employee review, although an employer with 10 or fewer employees may communicate it orally. It also requires the employer to review the plan with each covered employee when the plan is developed or the employee is first assigned, when the employee’s responsibilities under the plan change, and when the plan changes. The emergency sections of post orders should follow the same rule: when the building plan changes, the post orders change with it.
How Post Orders Are Written and Approved
A practical sequence for writing and approving post orders:
- Walk the post. Record doors, sightlines, alarm panels, equipment and the actual route an officer takes.
- Gather the governing documents. Contract scope, site security plan, emergency action plan, tenant rules and client policies.
- Draft in plain, specific language. One action per line, written in the order the officer will perform it.
- Review with the client and building management. Confirm hours, contacts, access rules and emergency roles.
- Approve and date. The approving party is usually set by the contract. In the Department of Energy example, changes do not take effect “until COR approval/concurrence is received,” meaning the client’s contracting officer’s representative. In the Alabama example, the approved procedures take effect through an implementation letter signed by the site commander.
- Train and confirm understanding. Officers should walk the post with a supervisor and be able to explain the duties back.
Where state training rules apply, site training may also be part of a legal requirement. In New York, the Division of Criminal Justice Services lists a 16 hour on-the-job training course due within 90 days of hire that is “specific to the individual’s job duties and assignments.” Training requirements vary by state and by license type, so each site should confirm the rules where it operates. The security guides and checklists library is a useful starting point.
Keeping Post Orders Current
The published examples set different review approaches. The Fermilab general post order states that it “shall be reviewed annually or more frequently, as needed.” The Alabama statement says its procedures “will be periodically revised to synchronize the collective security plan, incorporate lessons learned and accommodate new technologies,” and provides a detailed review of the procedures in each employee’s training and “each time the SOP is modified.” The Department of Energy statement requires the contractor to track all changes from the original version.
A sound practice combines a scheduled review with event-driven updates. Triggers for an update include:
- A change in hours, staffing or post locations
- New tenants, a renovation, or a change in access control hardware
- A change to the building’s emergency action plan or contact list
- An incident or near miss that shows the instructions were unclear
- A new client requirement or contract amendment
Each revision should carry a new version number, date, change summary and approval signature. Superseded versions should be removed from the post and kept on file.
Using Post Orders on Site
Post orders only work if officers can reach them during the shift. The Alabama statement requires the contractor to “maintain a current copy of the SOP at each guard post,” and the Fermilab order lists the post order book among the equipment officers must have before assuming their post. Printed or digital, they should be easy to find.
Use on site also needs oversight. The Government Accountability Office report on federal contract guards noted instances where guards “are not complying with post orders” and concluded that, where inspections were rare, the agency had “no assurance that guards are complying with their post orders.” On private sites, supervisors can check post orders against actual practice during site visits, ask officers to walk through key duties, and record the results.
Even where no contract or state requires it, a signed, dated acknowledgment at first assignment and after each revision records that the officer received the current version.
Frequently Asked Questions
What Is the Difference Between General Orders and Post Orders?
General orders apply to every post, such as uniform, conduct and reporting standards. Specific post orders cover the duties, hours and procedures of one post at one site.
Who Approves Security Post Orders?
The contract usually sets this. In many arrangements the security provider drafts the orders and the client or its designated representative approves them before they take effect.
How Often Should Post Orders Be Reviewed?
No single national rule applies to private sites. Some published government post orders call for annual review, and most also require updates when the site, the contract or the emergency plan changes.
Where Should Post Orders Be Kept?
A current copy should be available at the post itself, with superseded versions removed. Government examples require a copy at each guard post or in the officer’s possession before the shift begins.
Next Steps
Property managers and security directors reviewing their own post orders can compare them against the contents above and confirm that the emergency sections match the building’s current plan. For sites that need officers working from clear, current instructions, McCray’s commercial security guard services and the full list of McCray security services describe the coverage available.
Sources
- District of Columbia Department of General Services, Sample Post Orders: https://dgs.dc.gov/sites/default/files/dc/sites/dgs/publication/attachments/Exhibit%20C%20-%20Attachment%20J%2021%20-%20Sample%20Post%20Orders.pdf
- U.S. Department of Energy, National Energy Technology Laboratory, Performance Work Statement: https://netl.doe.gov/sites/default/files/site-support/Attachment%20A%20-%20Performance%20Work%20Statement_1.pdf
- Fermi National Accelerator Laboratory, General Post Order (2024): https://indico.fnal.gov/event/45730/attachments/179333/245933/2024%20General%20Post%20Order.pdf
- Alabama State Military Department, Security Guard Performance Work Statement: https://smd.alabama.gov/wp-content/uploads/2020/02/2018-PWS-Security-Guard-Contract.pdf
- U.S. Government Accountability Office, GAO-10-341, report on the Federal Protective Service contract guard program: https://www.gao.gov/assets/gao-10-341.pdf
- Occupational Safety and Health Administration, 29 CFR 1910.38, Emergency Action Plans: https://www.osha.gov/laws-regs/regulations/standardnumber/1910/1910.38
- New York State Division of Criminal Justice Services, Security Guard Training: https://www.criminaljustice.ny.gov/ops/sgtraining/index.htm
Planning coverage for a store, office or event? Call (833) 832-6647 or request a security assessment.


